Deltronic (.0050mm Step) Metric Pin Gage Sets – HTM24
$237.00 – $412.00
HTM24 (.0050mm Step) Metric Pin Gage Sets
HTM24 “Metric X” Gage-Sets consist of a nominal size gage plus 23 gages in SIZES RANGING UPWARD only from the nominal in .0050mm steps. Nominal determines set coverage.
Deltronic (.0050mm Step) Metric Pin Gage Sets - HTM24
HTM24 “Metric X” Gage-Sets consist of a nominal size gage plus 23 gages in SIZES RANGING UPWARD only from the nominal in .0050mm steps. Nominal determines set coverage.
Exceptional Flexibility of Sets
The range of gages, in each set, offer hundreds of combinations for qualifying hole sizes in or around the nominal size. You can choose any combination of GO/NO-GO tolerances, or use the range to find the exact size of a hole. They provide standards for zeroing comparators, setting snap gages, micrometer checking, hole center and layout determination, precision arbors for staging parts and/or checking runout of blanks.
Many plants, in consideration of the virtually unlimited applications and low sets costs, have provided duplicate sets to each department concerned with cylindrical gaging requirements. In doing this, they have established, for all their Q.C., Prototype, Receiving, and Production functions, a single, common, gage tolerance!
Single, Certified Tolerance
All Deltronic Class “X” Gage sets contain a “Certificate of Accuracy” that unconditionally guarantees: (a) each gage to be within a size tolerance of plus .000040”, minus nothing; (b) surface finish approximately one microinch; (c) both ends concentric to one another; and (d) specifies NIST traceability through gage blocks calibrated directly by NIST.
Wide Selection of Sets
Special sets available as Standard! Drawing from our Inventory of over 10000 sizes, many thousands of metric sets can be made up to suit your needs, while still shipping Same-Day. Limited only by our gage range of .1000 to 25.7000mm, Metric X sets are available with popular increments of .0100mm, .0050mm, and .0025mm only. Order by the set’s nominal and Step Size (HTM, THM, and PPM) shown below.
Dust/Rust Protective Case Has Detailed Markings
STANDARD GAGE-SET packaging consists of a Dust/Rust protection case that contains a labeling center strip to mark the location of the nominal gage and the exact slot location of each gage by increment. Each size-marked gage is easily located and replaced to maintain the order of the set. The clear plastic lid of each set is labeled to identity set type, nominal gage size, increments and limits of size range coverage. The double label makes this information visible from both the front and top of the case.
| Nominal Sizes From | Thru | Price |
|---|---|---|
| 0.1000 mm | 0.3800 mm | 362.00 |
| 0.3825 mm | 0.6275 mm | 333.00 |
| 0.6300 mm | 2.7425 mm | 237.00 |
| 2.7450 mm | 10.0350 mm | 242.00 |
| 10.0375 mm | 16.1925 mm | 254.00 |
| 16.1950 mm | 21.2575 mm | 348.00 |
| 21.2600 mm | 25.5850 mm | 412.00 |
Tags: pin gage set, pin set, pin gage sets, pin sets, gage pin set, gage set, gage pin sets, gage sets
Additional information
| Weight | 12 lbs |
|---|---|
| Dimensions | 16 × 11 × 7 in |
| Nominal Sizes | 0.1000mm – 0.3800mm, 0.3825mm – 0.6275mm, 0.6300mm – 2.7425mm, 2.7450mm – 10.0350mm, 10.0375mm – 16.1925mm, 16.1950mm – 21.2575mm, 21.2600mm – 25.5850mm |
| Step Size | 0.0050mm |
| Tolerance | +0.001mm |
