Deltronic 17/32″ to 1″ Inch Micro Ball Set, 1/32″ Steps – Model 901

Name: Deltronic 17/32" to 1" Inch Micro Ball Set, 1/32" Steps - Model 901 - Quality Control Solutions, Inc.
SKU: Model 901
Price: 179.20 USD
Availability: InStock

$179.20

SKU: Model 901 Categories: Deltronic, Inch, Micro Ball Sets, Micro Balls Brand: Deltronic

Ponam Product Request Form

Select gage type *

First Name *

Last Name *

Phone Number *

Email Address *

Select the option that best describes the inquiring group *BusinessIndividual

Business Location

Business Name *

Street Address *

Apartment, suite, etc

City *

State/Province *

ZIP / Postal Code *

Country *

Reason for Inquiry *

Describe your application and/or nominal if applicable. *0 / 150

Call for more information | (951) 676-1616

Deltronic Micro Ball Set – Model 901

17/32” to 1” in 1/32” steps. 3 of each size in plastic case.

Description
Additional information

Deltronic Micro Ball Set - Model 901

17/32” to 1” in 1/32” steps. 3 of each size in plastic case.

Chrome alloy steel balls, plus/minus .0001" diameter, .000.025" sphericity.

Checking micrometers at the exact spot for wear, as shown at point 'A,' where Micro Balls are ground and lapped to a sphericity of .000025 inches.
Checking wall thickness from the inside curve to the flat on the outside end.
In turning and grinding, where shoulder locations with respect to each other or to a common end are held close (.001”), it is imperative that the depth of the center drill be maintained. Choose a Micro Ball that is tangent to a center and measure overall as 'A' or indicate the distance as 'B.'
Checking the depth of valve seats, ways, slots, etc.
For boring of collets, select a set of Micro Balls that match the width of slots on the collet. Coat the Micro Balls with grease or Vaseline before inserting. Close the collet and bore."

Additional information

Weight	1 lbs
Sphericity	±0.000025"
Diameter Tolerance	±0.0001"
Range	17/32" to 1"

Deltronic 17/32″ to 1″ Inch Micro Ball Set, 1/32″ Steps – Model 901