*In Stock* Meyer Gage Class Z Pin Gage Plus .9250
$17.25
In stock
Call for more information | (951) 676-1616
[stock_status]
Individual English pin gages with a starting tolerance of .0001″ and roundness limit of .00005″ ( note tolerance limits increase above .8250″ per gage makers tolerance chart ). Pin sizes are available from .005″ to 1.005″ in increments of .0005″. All pins larger than .060” are laser marked with size, class, direction of tolerance and serial number for traceability.
Features
- Black Oxide treatment
- Class ZZ .0002″ tolerance
- Box and gages clearly marked
- No sharp edges
- All gages 2” long
- Your choice of plus or minus
- Certificate of conformance to ANSI B89. 1.5-1998
- Material E52100 bearing quality steel
- Hardness 60/62 Rockwell C
Uses
- Measuring hole sizes and depth
- Checking locations
- GO & NO/GO gaging
- Inspect holes, or slots for pass / fail conditions
- Checking micrometers and calipers
Finish
- Black OX surface treatment
- Centerless Ground
- 10 micro-inch finish
- Heat treated to 60-62 Rockwell C
- English gage with .0002″ limit
- Roundness Geometry .0001″ limit