Mark-10 Advanced Test Frames (Series F): F105, F305, F505, F505H + EasyMESUR®

Sale!

Starting at $3,500.00$3,325.00

Optional Functions

Optional Function Packages

Additional Items To Consider

Note: For full operation out of the box, you will need a Grip/Attachment to secure the sample.

EasyMeasur Brochure EasyMesur Manual

This family of force testers is designed for tension and compression force testing applications, with force capacities up to 500 lbF (2.2 kN). Select from vertical or horizontal orientations, along with a broad range of force sensor capacities and an expansive array of grips and fixtures.
Series F test frames with EasyMESUR® are engineered to perform a wide range of tension and compression tests, including break testing, cycling, limit testing to a load or distance, load holding, average force testing, and more.

Set up and run tests, export results, and create a report via the integrated, easy-to-use touchscreen interface – no PC or force gauge required. For unique needs, run the tester from a PC with your own custom application utilizing EasyMESUR®’s serial command library.

Sample setup and fine positioning are a breeze with available FollowMe® force-based positioning – using your hand as your guide, push and pull on the force gauge or load cell to move the crosshead at a variable rate of speed.

Engineered around a modular function platform, the EasyMESUR® run screen can be arranged with large, simple controls – or configured for more advanced applications with a selection of optional functions, including distance measurement, graphing, cycling, and more. Purchase functions and packages at time of order or enable them in the field via activation codes. All testers are shipped in a 160-hour evaluation mode, in which all functions are available.

Generous travel, clearance, and depth dimensions accommodate samples of various shapes and properties. Modular mechanical design accommodates single- and double-column extensions for oversized specimens.

Select from vertical or horizontal orientations, along with a broad range of force sensor capacities and an expansive array of grips and fixtures.

Series F Advanced Test Frame Features

  • Rigid and precise by design
  • Conveniently modular
  • External limit switches
  • Seamless force sensor interface
  • Easy-to-service electronics

EasyMESUR® Software

The EasyMESUR® integrated control panel centralizes test setup, test frame control, and data collection into one convenient place. Use the 7” touchscreen to create and run a wide range of tests, including:

  • Test to a load
  • Test to a sample break
  • Test to a distance
  • Load holding
  • Cycle testing
  • Average force testing

Run individual runs or batches, and view data in graphical format or results tables. Save or export data as needed, or generate a report.

Specifications

Specs F105 F305 F505 F505H
Load capacity*: 100 lbF
[0.5 kN]
300 lbF
[1.5 kN]
500 lbF
[2.2 kN]
Maximum travel: 18.0 in
[457 mm]
Speed range: 0.02 – 45 in/min
[0.5 – 1,100 mm/min]
Load accuracy
(% of full scale)
  • Test frame: ±0.1%
  • Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15%
Load sampling rate: 20,000 Hz
Data acquisition rate: 1,000 Hz
Speed accuracy: ±0.2% of setting, virtually no variation with load
Distance accuracy: ±0.002 in [0.05 mm], factory-compensated at up to full load
Distance resolution: 0.0005 in [0.01 mm]
Limit switch repeatability: ±0.001 in [0.03 mm]
Power: Universal input 100-240 VAC, 50/60 Hz, 300W
Fuse type: 1.2 A, 250V, 3AG, SLO BLO
Weight (test frame only): 60 lb
[27 kg]
70 lb
[32 kg]
Shipping weight: 75 lb
[34 kg]
85 lb
[39 kg]
Environmental conditions:
  • Indoor use only
  • Up to 6,500 ft [2,000 m] above sea level
  • Temperature range: 40 – 95°F [5 – 35°C]
  • Humidity range: up to 80% relative humidity at 31°C, decreasing
    linearly to 50% relative humidity at 40°C, non-condensing
  • Mains supply voltage fluctuations up to ±10 % of the nominal
    voltage
  • Transient overvoltages up to the levels of Overvoltage Category II
  • Use in environments up to Pollution Degree 2
Conformance: CE
Warranty: 3 years [see individual statement for further details]

* Load capacity is reduced at higher speeds, as follows:
– F305: limited to 200 lbF [1 kN] above 24 in [610 mm]/min
– F505 / F505H: limited to 300 lbF [1.5 kN] above 24 in [610 mm]/min

In The Box

The F105-EM, F305-EM, F505-EM, and F505H-EM advanced test frames are shipped as shown at left, and includes the following accessories:

(1) Control panel, mounting bracket, and hardware
(1) #10-32M medium hook
(1) 5/16-18M large hook
(1) #10-32F 2” diameter compression plate
(1) #10-32 M/F 2” extension rod
(1) #10-32 F/F coupler
(1) Adapter, 5/16-18M to #10-32F
(1) Set screw, #10-32 x 3/4”
(2) Hex nut, #10-32
(1) Power cord
(1) Allen wrench set

Optional Equipment

Series FS05 force sensorsMeasure tension and compression forces. Mount directly to the test frame’s crosshead without any cables. Capacities from 0.12 to 500 lbF [0.5 to 2,500 N].
Safety shield (AC1092-1, AC1092-2)Provides pinch and sample debris protection for the operator. Includes an electrical interlock, preventing operation while the door is open.
Single column extensions (AC1094-1 / -2 / -3)Increase the vertical clearance for tall samples. Multiple extensions may be stacked for very long samples.

Three lengths are available – 6, 12 and 24 in [150, 300, and 600 mm].

Not compatible with the AC1086 safety shield.

Double column extensions (AC1095-1 / -2 / -3)Accommodate up to a 20 in. [508 mm] wide sample, or ø21.5 in [ø546 mm] round sample.

Three heights are available – 6, 12 and 24 in [150, 300, and 600 mm]. Base contains rows of T-slots for fixture mounting.

Not compatible with the AC1086 safety shield.

USB hub (AC1093)Test frame-mounted 4-port USB hub improves cable management and conveniently accommodates peripherals, such as a flash drive, barcode scanner, etc. Compatible with all Series F test frames.
Eye end adaptersAllow for quick grip installation and removal, and prevent grip rotation.
Mount to common test frames, load cells, and force gauges.
Adapter, FS05 to Plug & Test® connectorAdapts a Series FS05 force sensor or PTAF sensor adapter to Plug & Test® type interface, for ease of external calibration via a Mark-10 indicator. Also permits mounting of a Series FS05 sensor to Models F755, F755S, F1505, and F1505S test frames.
Third-party sensor adapter (PTAF)Adapt a third-party party force sensor to Series F frames and Models M5I and M7I indicators.

Dimensions

F105 / F305 / F505
IN[MM]

Weight 75 lbs
Dimensions 39 × 21 × 13 in
Model

F105-EM, F305-EM, F505-EM, F505H-EM

Scroll to Top
Scroll to Top
preloader