Mark-10 Advanced Test Frames (Series F): F755-EM, F755S-EM, F1505-EM, F1505S-EM

Note: For full operation out of the box, you will need a Grip/Attachment to secure the sample.

EasyMeasur Brochure EasyMesur Manual

Series F test frames with EasyMESUR® are engineered to perform a wide range of tension and compression tests, including break testing, cycling, limit testing to a load or distance, load holding, average force testing, and more.

Set up and run tests, export results, and create a report via the integrated, easy-to-use touchscreen interface – no PC or force gauge required. For unique needs, run the tester from a PC with your own custom application utilizing EasyMESUR®’s serial command library.

Sample setup and fine positioning are a breeze with available FollowMe® force-based positioning – using your hand as your guide, push and pull on the force gauge or load cell to move the crosshead at a variable rate of speed.

Engineered around a modular function platform, the EasyMESUR® run screen can be arranged with large, simple controls – or configured for more advanced applications with a selection of optional functions, including distance measurement, graphing, cycling, and more. Purchase functions and packages at time of order or enable them in the field via activation codes. All testers are shipped in a 160-hour evaluation mode, in which all functions are available.

Generous travel, clearance, and depth dimensions accommodate samples of various shapes and properties. Modular mechanical design accommodates single- and double-column extensions for oversized specimens.

Select from vertical or horizontal orientations, along with a broad range of force sensor capacities and an expansive array of grips and fixtures.

Starting at $7,500.00

Add-Ons

Series F Advanced Test Frame Features

  • Rigid and precise by design
  • Conveniently modular
  • External limit switches
  • Seamless force sensor interface
  • Easy-to-service electronics

EasyMESUR® Software

The EasyMESUR® integrated control panel centralizes test setup, test frame control, and data collection into one convenient place. Use the 7” touchscreen to create and run a wide range of tests, including:

  • Test to a load
  • Test to a sample break
  • Test to a distance
  • Load holding
  • Cycle testing
  • Average force testing

Run individual runs or batches, and view data in graphical format or results tables. Save or export data as needed, or generate a report.

Specifications

SpecsF755-EMF755S-EMF1505-EMF1505S-EM
Load capacity*:750 lbF
[3.4 kN]
1,500 lbF
[6.7 kN]
Maximum travel:32.0 in
[813 mm]
14.2 in
[360 mm]
32 in
[813 mm]
14.2 in
[360 mm]
Speed range:0.5 – 24 in/min
[10 – 600 mm/min]
Optional Speed Range:0.001 – 60 in/min
[0.02 – 1,525 mm/min]
0.001 – 70 in/min
[0.02 – 1,800 mm/min]
Load accuracy
(% of full scale)

  • Test frame: ±0.1%
  • Force sensor: Series FS05: ±0.1% | Series R07: ±0.15%
Load sampling rate:5,000 Hz
Data acquisition rate:100 Hz
Speed accuracy:±0.2% of setting, virtually no variation with load
Distance accuracy: ±0.006 in [0.15 mm], at any load or position
Distance resolution:0.001 in [0.02 mm]
Limit switch repeatability:±0.001 in [0.03 mm]
Power:Universal input 100-240 VAC, 50/60 Hz, 300WUniversal input 100-240 VAC, 50/60 Hz, 450W
Fuse type:4A, 3AG, SLO BLO
Weight (test frame only):184 lb
[83 kg]
149 lb
[68 kg]
197 lb
[89 kg]
157 lb
[71 kg]
Shipping weight:235 lb
[107 kg]
195 lb
[88 kg]
247 lb
[112 kg]
205 lb
[93 kg]
Environmental conditions:

  • Indoor use only
  • Up to 6,500 ft [2,000 m] above sea level
  • Temperature range: 40 – 95°F [5 – 35°C]
  • Humidity range: up to 80% relative humidity at 31°C, decreasing
    linearly to 50% relative humidity at 40°C, non-condensing
  • Mains supply voltage fluctuations up to ±10 % of the nominal
    voltage
  • Transient overvoltages up to the levels of Overvoltage Category II
  • Use in environments up to Pollution Degree 2
Conformance:CE, UKCA
Warranty: 3 years [see individual statement for further details]

* Load capacity is reduced at higher speeds, as follows:
– F755 / F755S: limited to 500 lbF [2.3 kN] above 35 in [900 mm]/min
– F1505 / F1505S: limited to 1,000 lbF [4.5 kN] above 60 in [1,525 mm]/min

In The Box

The F755-EM, F755S-EM, F1505-EM, and F1505S-EM advanced test frames are shipped as shown at left, and includes the following accessories:

(1) Control panel, mounting bracket, and hardware
(1) Eye end kit for base
(2) Lock ring for eye end
(2) Spanner wrench
(1) Power cord
(1) Allen wrench set

Optional Equipment

Series FS05 force sensors

Measure tension and compression forces. Mount directly to the test frame’s crosshead without any cables. Capacities from 0.12 to 500 lbF [0.5 to 2,500 N].

Safety shield (AC1092-1, AC1092-2)

Provides pinch and sample debris protection for the operator. Includes an electrical interlock, preventing operation while the door is open.

Single column extensions (AC1094-1 / -2 / -3)

Increase the vertical clearance for tall samples. Multiple extensions may be stacked for very long samples.

Three lengths are available – 6, 12 and 24 in [150, 300, and 600 mm].

Not compatible with the AC1086 safety shield.

Eye end adapters

Allow for quick grip installation and removal, and prevent grip rotation.
Mount to common test frames, load cells, and force gauges.

Third-party sensor adapter (PTAF)

Adapt a third-party party force sensor to Series F frames and Models M5I and M7I indicators.

Dimensions

F755 / F755S / F1505 / F1505S-EM
IN[MM]

Weight247 lbs
Dimensions15 × 10 × 33 in
Model

F105-EM, F305-EM, F505-EM, F505H-EM, F755-EM, F755S-EM, F1505-EM, F1505S-EM

Scroll to Top
Scroll to Top