Mark-10 Advanced Test Frames (Series F): F755 / F1505 + INTELLIMESUR®


Note: For full operation out of the box, you will need a Series MR07 Force Sensor, and Grips/Attachments to secure the sample.

Series F Brochure Series F Manual

This family of force testers is designed for tension and compression force testing applications, with force capacities up to 1,500 lbF (6.7 kN). Select from a broad range of force sensor capacities and an expansive array of grips and fixtures.

Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device.

* All test frame models contain a universal power supply (80 – 240V) and power cord with US prong style. Add suffix ‘E’ for European prong, ‘U’ for UK prong, or ‘A’ for Australian prong. Ex: F505-IMTE. Tablets are supplied with a universal power supply, however, are only available with a US prong. A prong adapter is included when one of the above-mentioned suffixes is specified.

Starting at $12,670.00$12,036.50

Additional Items To Consider

Series F Advanced Test Frame Features

  • Rigid and precise by design
  • Conveniently modular
  • External limit switches
  • Seamless force sensor interface
  • Easy-to-service electronics

IntelliMESUR® Software

IntelliMESUR® software is an integrated solution running on Windows tablets and PCs. Select a pre-loaded 10.1” tablet with mounting bracket or use your own Windows device. With IntelliMESUR®, you can create and run a wide range of basic and multi-step tests, including:

Limit testing to a load, break, or distance

  • Height measurement
  • Load holding
  • Cycle testing
  • Multi-step testing, utilizing any combination of the above functions

Run individual runs or batches, and view data in graphical format or results tables. Save or export data as needed, or generate a report.


Load capacity1:750 lbF
[3.4 kN]
1,500 lbF
[6.7 kN]
Maximum travel:32.0 in
[813 mm]
14.2 in
[360 mm]
32 in
[813 mm]
14.2 in
[360 mm]
Speed range:0.001 – 60 in/min
[0.02 – 1,525 mm/min]
0.001 – 70 in/min
[0.02 – 1,800 mm/min]
Load accuracy
(% of full scale)
  • Test frame + force sensor, calibrated together: ±0.1%
  • Test frame alone: ±0.1%
  • Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15%
Speed setting accuracy:±0.2%
Load sampling rate:20,000 Hz
Data acquisition rate:1,000 Hz
Speed accuracy:±0%, stepper motor driven
Distance accuracy:±0.002 in [0.05 mm], factory-compensated at up to full load
Distance resolution:0.0005 in [0.01 mm]
Limit switch repeatability:±0.001 in
[0.03 mm]
Power:Universal input 100-240 VAC, 50/60 Hz, 120WUniversal input 100-240 VAC, 50/60 Hz, 450W
Fuse type:4A, 3AG, SLO BLO
Weight (test frame only):184 lb
[83 kg]
149 lb
[68 kg]
197 lb
[89 kg]
157 lb
[71 kg]
Shipping weight:235 lb
[107 kg]
195 lb
[88 kg]
247 lb
[112 kg]
205 lb
[93 kg]
Environmental conditions:
  • Indoor use only
  • Up to 6,500 ft [2,000 m] above sea level
  • Temperature range: 40 – 95°F [5 – 35°C]
  • Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing
  • Mains supply voltage fluctuations up to ±10 % of the nominal voltage
  • Transient overvoltages up to the levels of Overvoltage Category II
  • Use in environments up to Pollution Degree 2
Warranty:3 years [see individual statement for further details]

1. Load capacity is reduced at higher speeds, as follows:
– F755 / F755S: limited to 500 lbF [2.3 kN] above 35 in [900 mm]/min
– F1505 / F1505S: limited to 1,000 lbF [4.5 kN] above 60 in [1,525 mm]/min

2. May be extended via single- or double-column extensions.

In The Box

IMT ModelsIM Models
The F755-IMT, F755S-IMT, F1505-IMT, and F1505S-IMT advanced test frames include the following accessories:(1) Control panel, mounting bracket, and hardware
(1) USB cable
(1) Eye end kit for base
Includes: (1) eye end, (1) anchor pin, (2) lock rings
(2) Spanner wrench
(1) Power cord
(1) Allen wrench set
(1) NIST-traceable certificate of calibration, force
The F755-IM, F755S-IM, F1505-IM, and F1505S-IM advanced test frames include the following accessories:(1) USB flash drive containing software installation files
(1) USB dongle
(1) USB cable
(1) Eye end kit for base
Includes: (1) eye end, (1) anchor pin, (2) lock rings
(2) Spanner wrench
(1) Power cord
(1) Allen wrench set
(1) NIST-traceable certificate of calibration, force

Optional Equipment

Series R07 force sensorsSeries MR07 force sensors measure tension and compression forces, and are designed for Series F test frames. Capacities from 50 to 1,500 lbF (250 N to 7.5 kN)..
Safety shield (AC1092-1, AC1092-2)Provides pinch and sample debris protection for the operator. Includes an electrical interlock, preventing operation while the door is open.
USB hub (AC1093)Test frame-mounted 4-port USB hub improves cable management and conveniently accommodates peripherals, such as a flash drive, barcode scanner, etc. Compatible with all Series F test frames.
Eye end adaptersAllow for quick grip installation and removal, and prevent grip rotation.
Mount to common test frames, load cells, and force gauges.
Third-party sensor adapter (PTAF)Adapt a third-party party force sensor to Series F frames and Models M5I and M7I indicators.



F150051.35 [1304.3]8.125 – 40.125 [206.4 – 1019.2]
F75051.35 [1304.3]8.125 – 40.125 [206.4 – 1019.2]
F1500S33.89 [860.9]8.125 – 22.33 [206.4 – 567.1]
F750S33.89 [860.9]8.125 – 22.33 [206.4 – 567.1]
Weight235 lbs
Dimensions55 × 16 × 25 in

F755-IMT, F755S-IMT, F1505-IMT, F1505S-IMT, F755-IM, F755S-IM, F1505-IM, F1505S-IM

You may also like…

  • Sale! Mark-10 Advanced Test Frames (Series F): F105, F305, F505, F505H Wedge Grips
  • Sale! G1061
    Mark-10 Grips

    Mark-10 G1061 Wedge Grips

    Starting at $515.00$489.25 Select options
  • Sale! Mark-10 Series R07 Force Sensors
    Series F Force Sensors

    Mark-10 Series MR07 Force Sensors

    $740.00$703.00 Select options
  • Sale!
    Featured Products

    IntelliMESUR® Materials Testers

    $2,375.00 Add to cart
Scroll to Top
Scroll to Top