Mark-10 Shields for Test Frames
$2,251.50 – $3,619.50
Provides pinch and sample debris protection for the operator. An electrical interlock prevents test frame operation while the door is open. The test frame’s control panel and remote emergency stop (applicable models, only) mount to the shield’s extruded frame. See Compatibility tab to select an appropriate shield for your test frame.
Note: When ordering a shield with a new test frame, the AC1125-1 emergency switch connector is required. For an existing test frame, verify if this connector is present. If not, it can be installed in the field with kit AC1125-2, or retrofitted at our factory.
Specifications
- HS Code:
9024800000 - ECCN:
EAR99 - Country of origin:
USA
Compatibility
Test Frame Model | Shield Model |
---|---|
F105 / F305 / F505* | AC1092-2 |
F105 / F305 / F505 + column extension up to 24”* | AC1092-1 |
F755* | AC1092-1 |
F755S* | AC1092-2 |
F1505* | AC1092-1 |
F1505S* | AC1092-2 |
ESM303 | AC1092-4 |
ESM303 + column extension up to 24” | AC1092-3 |
ESM750 | AC1092-1 |
ESM750S | AC1092-2 |
ESM1500 | AC1092-1 |
ESM1500S | AC1092-2 |
* An emergency stop connector must be installed in the test frame, at the factory or in the field. See Ordering Information.
Note: Shields are not compatible with test frames fitted with a double column extension.
Dimensions
IN [MM]
AC1092-1 / AC1092-3:
AC1092-2 / AC1092-4:
Additional information
Shield Height | Shield, 51.9" height, Shield, 34.4" height, Shield, 51.9" height, ESM303 with column extension up to 24", Shield, 34.4" height, ESM303 |
---|