43339 Business Park Dr. Suite 101, Temecula, CA 92590

43339 Business Park Dr Suite 101, Temecula, CA

Vermont Gage MINUS Class ZZ Standard Pin Gage Sets (Metric)

$110.00$915.00

$


Call for more information | (951) 676-1616

Make quick and accurate measurements with Vermont Gage Pin Gages. Measure hole sizes. Calculate distances between holes. Gage slot widths. Check locations. Use for Go/NoGo gaging. Size in micrometers and snap gages. These economical gages give you added wear life, unlike closer tolerance gages available on the market today.

ECONOMICAL GENERAL PURPOSE PIN GAGES

Make quick and accurate measurements with Vermont Gage Pin Gages. Measure hole sizes. Calculate distances between holes. Gage slot widths. Check locations. Use for Go/ NoGo gaging. Size in micrometers and snap gages. These economical gages give you added wear life, unlike closer tolerance gages available on the market today.

  • Class ZZ (.0002" or .005mm tolerance)
  • Go (Plus) or NoGo (Minus)
  • Available in Steel or Black GuardTM
  • NIST traceable
  • .0005" or .02mm sizes
  • .001" or .02mm set increments
  • Tool Steel; 60/65 Rc
  • 2" long
  • 10 microinch finish or better
  • Round within .0001" or .0025mm
  • Marked with size and direction of tolerance on gages over .0605"

STEEL CLASS ZZ GAGE PINS & SETS

Make quick and accurate measurements with Vermont Gage pin gages. Measure hole diameters, calculate distances between holes, gage slot widths and locations. Use for Go/NoGo inspection. Set micrometers, verniers and other measuring devices.

Drw unit Stack 1kraken

  • Class ZZ (.0002" or 0.005mm tolerance)
  • Go (Plus) or NoGo (Minus)
  • .0005" or 0.01mm diameters
  • .001" or 0.02mm set increments
  • Tool Steel; 60/65 Rc
  • 2" Long
  • 10 microinch finish or better
  • Round within .0001" or 0.0025mm
  • Marked with diameter and direction of tolerance on gages over .0605"
  • Certificate of Accuracy is included.
  • ISO 17025 Accredited and Non-Accredited Calibration Certificates may be purchased.

BLACK GUARDâ„¢ CLASS ZZ SETS & PINS

Black Guardâ„¢ black oxide treatment typically penetrates .000040" - .000060" deep, which will visually reveal wear patterns allowing the inspector to calibrate or replace gage pins more effectively.

Black Guardâ„¢ treatment will help prevent rust and corrosion, which will extend the useful life of the gage.

4DrwUnitBG2

  • Prevents Rust and Corrosion
  • Visible Wear Indication
  • Longer Life
  • Class ZZ (.0002" or 0.005mm tolerance)
  • Go (Plus) or NoGo (Minus)
  • .0005" or 0.01mm diameters
  • .001" or 0.02mm set increments
  • Tool Steel; 60/65 Rc
  • 2" Long
  • 10 microinch finish or better
  • Round within .0001" or 0.0025mm
  • Marked with diameter and direction of tolerance on gages over .0605"
  • Certificate of Accuracy is included.
  • ISO 17025 Accredited and Non-Accredited Calibration Certificates may be purchased.

Tags: pin gage set, pin set, pin gage sets, pin sets, gage pin set, gage set, gage pin sets, gage sets

Additional information

Weight N/A
Range

.20mm to 1.28mm, .21mm to 1.29mm, 1.30mm to 4.98mm, 1.31mm to 4.99mm, 5.00mm to 9.98mm, 5.01mm to 9.99mm, 10.00mm to 13.98mm, 10.01mm to 13.99mm, 14.00mm to 16.48mm, 14.01mm to 16.49mm, 16.50mm to 18.98mm, 16.51mm to 18.99mm, 19.00mm to 20.98mm, 19.01mm to 20.99mm, 21.00mm to 22.48mm, 21.01mm to 22.49mm, 22.50mm to 23.98mm, 22.51mm to 23.99mm, 24.00mm to 25.48mm, 24.01mm to 25.49mm

Material

Steel, Blackguard

Related Products

Shopping cart0
There are no products in the cart!
0
Skip to content