43339 Business Park Dr. Suite 101, Temecula, CA 92590

43339 Business Park Dr Suite 101, Temecula, CA

Vermont Gage PLUS Class ZZ Standard Pin Gage Libraries (Metric)

$1,310.00$6,030.00



Call for more information | (951) 676-1616

Variants: 902101100, 102101100, 902101150, 102101150, 902101200, 102101200, 902101250, 102101250, 902301100, 102301100, 902301150, 102301150, 902301200, 102301200, 902301250, 102301250, 902101300, 102101300, 902101350, 102101350, 902101400, 102101400, 902101450, 102101450, 902301300, 102301300, 902301350, 102301350, 902301400, 102301400, 902301450, 102301450 Call for Pricing on Calibration – Accredited and Non-Accredited Options Available

Make quick and accurate measurements with Vermont Gage Pin Gages. Measure hole sizes. Calculate distances between holes. Gage slot widths. Check locations. Use for Go/NoGo gaging. Size in micrometers and snap gages. These economical gages give you added wear life, unlike closer tolerance gages available on the market today.

ECONOMICAL GENERAL PURPOSE PIN GAGES

Make quick and accurate measurements with Vermont Gage Pin Gages. Measure hole sizes. Calculate distances between holes. Gage slot widths. Check locations. Use for Go/ NoGo gaging. Size in micrometers and snap gages. These economical gages give you added wear life, unlike closer tolerance gages available on the market today.

  • Class ZZ (.0002" or .005mm tolerance)
  • Go (Plus) or NoGo (Minus)
  • Available in Steel or Black GuardTM
  • NIST traceable
  • .0005" or .01mm sizes
  • .001" or .02mm set increments
  • Tool Steel; 60/65 Rc
  • 2" long
  • 10 microinch finish or better • Round within .0001" or .0025mm
  • Marked with size and direction of tolerance on gages over .0605" • Additional library configurations available upon request
  • Certificate of Accuracy included
  • See pages 108-109 for Calibration Services

STEEL CLASS ZZ GAGE PINS & SETS

Make quick and accurate measurements with Vermont Gage pin gages. Measure hole diameters, calculatedistances between holes, gageslot widths and locations. Use for Go/NoGo inspection. Set micrometers, verniers and other measuring devices.

Drw unit Stack 1kraken

  • Class ZZ (.0002" or 0.005mm tolerance)
  • Go (Plus) or NoGo (Minus)
  • .0005" or 0.01mm diameters
  • .001" or 0.02mm set increments
  • Tool Steel; 60/65 Rc
  • 2" Long
  • 10 microinch finish or better
  • Round within .0001" or 0.0025mm
  • Marked with diameter and direction of tolerance on gages over .0605"
  • Certificate of Accuracy is included.
  • ISO 17025 Accredited and Non-Accredited Calibration Certificates may be purchased.

BLACK GUARD™ CLASS ZZ SETS & PINS

Black Guard™ black oxide treatment typically penetrates .000040" - .000060" deep, which will visually reveal wear patterns allowing the inspector to calibrate or replace gage pins more effectively.

Black Guard™ treatment will help prevent rust and corrosion, which will extend the useful life of the gage.

4DrwUnitBG2

  • Prevents Rust and Corrosion
  • Visible Wear Indication
  • Longer Life
  • Class ZZ (.0002" or 0.005mm tolerance)
  • Go (Plus) or NoGo (Minus)
  • .0005" or 0.01mm diameters
  • .001" or 0.02mm set increments
  • Tool Steel; 60/65 Rc
  • 2" Long
  • 10 microinch finish or better
  • Round within .0001" or 0.0025mm
  • Marked with diameter and direction of tolerance on gages over .0605"
  • Certificate of Accuracy is included.
  • ISO 17025 Accredited and Non-Accredited Calibration Certificates may be purchased.

Tags: pin gage library, pin library, pin gage libraries, pin libraries, gage pin library, gage library, gage pin libraries, gage libraries

Additional information

WeightN/A
Range

0.20mm to 13.98mm, 0.21mm to 13.99mm, 0.20mm to 18.98mm, 0.21mm to 18.99mm, 0.20mm to 22.48mm, 0.21mm to 22.49mm, 0.20mm to 25.48mm, 0.21mm to 25.49mm, 1.30mm to 16.48mm, 1.31mm to 16.49mm, 1.30mm to 20.98mm, 1.31mm to 20.99mm, 1.30mm to 23.98mm, 1.31mm to 23.99mm, 1.30mm to 25.48mm, 1.31mm to 25.49mm

Material

Steel, Blackguard

Related Products

Shopping cart0
There are no products in the cart!
0
Skip to content preloader