Vermont Gage PLUS Class ZZ Standard Pin Gage Sets (Inch)
Make quick and accurate measurements with Vermont Gage Pin Gages. Measure hole sizes. Calculate distances between holes. Gage slot widths. Check locations. Use for Go/NoGo gaging. Size in micrometers and snap gages. These economical gages give you added wear life, unlike closer tolerance gages available on the market today.
ECONOMICAL GENERAL PURPOSE PIN GAGES
Make quick and accurate measurements with Vermont Gage Pin Gages. Measure hole sizes. Calculate distances between holes. Gage slot widths. Check locations. Use for Go/ NoGo gaging. Size in micrometers and snap gages. These economical gages give you added wear life, unlike closer tolerance gages available on the market today.
- Class ZZ (.0002" or .005mm tolerance)
- Go (Plus) or NoGo (Minus)
- Available in Steel or Black GuardTM
- NIST traceable
- .0005" or .02mm sizes
- .001" or .02mm set increments
- Tool Steel; 60/65 Rc
- 2" long
- 10 microinch finish or better
- Round within .0001" or .0025mm
- Marked with size and direction of tolerance on gages over .0605"
STEEL CLASS ZZ GAGE PINS & SETS
Make quick and accurate measurements with Vermont Gage pin gages. Measure hole diameters, calculatedistances between holes, gageslot widths and locations. Use for Go/NoGo inspection. Set micrometers, verniers and other measuring devices.
- Class ZZ (.0002" or 0.005mm tolerance)
- Go (Plus) or NoGo (Minus)
- .0005" or 0.01mm diameters
- .001" or 0.02mm set increments
- Tool Steel; 60/65 Rc
- 2" Long
- 10 microinch finish or better
- Round within .0001" or 0.0025mm
- Marked with diameter and direction of tolerance on gages over .0605"
- Certificate of Accuracy is included.
- ISO 17025 Accredited and Non-Accredited Calibration Certificates may be purchased.
BLACK GUARD™ CLASS ZZ SETS & PINS
Black Guard™ black oxide treatment typically penetrates .000040" - .000060" deep, which will visually reveal wear patterns allowing the inspector to calibrate or replace gage pins more effectively.
Black Guard™ treatment will help prevent rust and corrosion, which will extend the useful life of the gage.
- Prevents Rust and Corrosion
- Visible Wear Indication
- Longer Life
- Class ZZ (.0002" or 0.005mm tolerance)
- Go (Plus) or NoGo (Minus)
- .0005" or 0.01mm diameters
- .001" or 0.02mm set increments
- Tool Steel; 60/65 Rc
- 2" Long
- 10 microinch finish or better
- Round within .0001" or 0.0025mm
- Marked with diameter and direction of tolerance on gages over .0605"
- Certificate of Accuracy is included.
- ISO 17025 Accredited and Non-Accredited Calibration Certificates may be purchased.
Tags: pin gage set, pin set, pin gage sets, pin sets, gage pin set, gage set, gage pin sets, gage sets
Additional information
Range | .0060″ to .0600″, .0065″ to .0605″, .0110″ to .0600″, .0115″ to .0605″, .0110″ to .2500″, .0115″ to .2505″, .0610″ to .2500″, .0615″ to .2505″, .2510″ to .5000″, .2515″ to .5005″, .5010″ to .6250″, .5015″ to .6255″, .6260″ to .7500″, .6265″ to .7505″, .7510″ to .8320″, .7515″ to .8325″, .8330″ to .9160″, .8335″ to .9165″, .9170″ to 1.0000″, .9175″ to 1.0005″ |
---|---|
Material | Steel, Blackguard |