Use the following chart to help you narrow down your decision on Universal Punch concentricity gauges, based on your part length and/or diameter. The dimensions for each gauge is included as well.
You will notice that some gauges are very similar in specifications. If you are still undecided, it is recommended to go to each product for more information and pictures. For example, gauges may vary in their configurations, physical dimensions, indicators that can be used, accessories that may be added, etc.
If you need help walking you through without reading a chart, try our Gauge Selection Wizard:
| Model Type | Description | Part Diameter | Part Length | Gage Length | Gage Width | Gage Height |
|---|---|---|---|---|---|---|
A-10
 |
Basic Single Gauge / 3-25mm / Standard Carrier | 0.04″ – 1″ (1 – 25mm) | 0.06″ – 3″ (1.5 – 76 mm) | 8.5″ (216 mm) | 4.5″ (114 mm) | 6″ appx. (152 mm) |
B-10
 |
Basic Extended Gauge / 3-25mm / Standard Carrier | 0.04″ – 1″ (1 – 25mm) | 0.06″ – 4″ (1.5 – 102 mm) | 10.5″ (267 mm) | 4.5″ (114 mm) | 6″ appx. (152 mm) |
B-20
 |
Basic Extended Gauge / 10-50mm / Standard Carrier | 0.37″ – 2″ (10 – 50 mm) | 0.18″ – 6″ (4.7 – 152 mm) | 12.5″ (318 mm) | 4.5″ (114 mm) | 6″ appx. (152 mm) |
B-40
 |
Basic Extended Gauge / 20-105mm / Standard Carrier | 0.75″ – 4″ (20 – 102 mm) | 0.25″ – 8″ (6.3 – 203 mm) | 14.5″ (368 mm) | 6″ (152 mm) | 8″ appx. (203 mm) |
E-10
 |
Eccentric Checker Gauge / 3-25mm / Vertical Roller Carrier | 0.04″ – 1″ (1 – 25mm) | 0.18″ – 4″ (4.7 – 102 mm) | 10.5″ (267 mm) | 4.5″ (114 mm) | 6″ appx. (152 mm) |
| E-20
|
Eccentric Checker Gauge / 10-50mm / Vertical Roller Carrier | 0.37″ – 2″ (10 – 50 mm) | 0.18″ – 6″ (4.7 – 152 mm) | 12.5″ (318 mm) | 4.5″ (114 mm) | 6″ appx. (152 mm) |
| E-40
|
Eccentric Checker Gauge / 20-105mm / Vertical Roller Carrier | 0.75″ – 4″ (20 – 102 mm) | 0.25″ – 8″ (6.3 – 203 mm) | 14.5″ (368 mm) | 6″ (152 mm) | 8″ appx. (203 mm) |
F-10
 |
Recess Fastener Checker Gauge / 3-25mm / Recess Checking Carrier | 0.04″ – 1″ (1 – 25mm) | 0.18″ – 4″ (4.7 – 102 mm) | 10.5″ (267 mm) | 4.5″ (114 mm) | 6″ appx. (152 mm) |
| F-20
|
Recess Fastener Checker Gauge / 10-50mm / Recess Checking Carrier | 0.37″ – 2″ (10 – 50 mm) | 0.18″ – 6″ (4.7 – 152 mm) | 12.5″ (318 mm) | 4.5″ (114 mm) | 6″ appx. (152 mm) |
G1-10
 |
Side Checker Gage / 3-25mm / Side Carrier | 0.04″ – 1″ (1 – 25mm) | 0.18″ – 4″ (4.7 – 102 mm) | 10.5″ (267 mm) | 4.5″ (114 mm) | 6″ appx. (152 mm) |
| G1-20
|
Side Checker Gage / 10-50mm / Side Carrier | 0.37″ – 2″ (10 – 50 mm) | 0.18″ – 6″ (4.7 – 152 mm) | 12.5″ (318 mm) | 4.5″ (114 mm) | 6″ appx. (152 mm) |
| G1-40
|
Side Checker Gage / 20-105mm / Side Carrier | 0.75″ – 4″ (20 – 102 mm) | 0.25″ – 8″ (6.3 – 203 mm) | 14.5″ (368 mm) | 6″ (152 mm) | 8″ appx. (203 mm) |
G2-10
 |
Side Checker Gage / 3-25mm / Vertical Carrier | 0.04″ – 1″ (1 – 25mm) | 0.18″ – 4″ (4.7 – 102 mm) | 10.5″ (267 mm) | 4.5″ (114 mm) | 6″ appx. (152 mm) |
| G2-20
|
Side Checker Gage / 10-50mm / Vertical Carrier | 0.37″ – 2″ (10 – 50 mm) | 0.18″ – 6″ (4.7 – 152 mm) | 12.5″ (318 mm) | 4.5″ (114 mm) | 6″ appx. (152 mm) |
| G2-40
|
Side Checker Gage / 20-105mm / Vertical Carrier | 0.75″ – 4″ (20 – 102 mm) | 0.25″ – 8″ (6.3 – 203 mm) | 14.5″ (368 mm) | 6″ (152 mm) | 8″ appx. (203 mm) |
H-10
 |
Standard Shaft Gage / 3-25mm / Vertical Carrier | 1/8″ – 1″ (3 – 25mm) | 0.18″ – 12″ (4.7 – 305 mm) | 12.5″ (318 mm) | 5.5″ (140 mm) | 9″ appx. (229 mm) |
| H-20
|
Standard Shaft Gage / 10-50mm / Vertical Carrier | 0.37″ – 2″ (10 – 50 mm) | 0.18″ – 12″ (4.7 – 305 mm) | 12.5″ (318 mm) | 5.5″ (140 mm) | 9″ appx. (229 mm) |
| H-40
|
Standard Shaft Gage / 20-105mm / Vertical Carrier | 0.75” to 4” (20mm to 102mm) | 0.18″ – 12″ (4.7 – 305 mm) | 12.5″ (318mm) | 5.5″ (140mm) | 9″ appx. (229 mm) |
HL-10
 |
Extended Shaft Gage / 3-25mm / Vertical Carrier | 1/8″ – 1″ (3 – 25mm) | 0.18″ – 24″ (4.7 – 610 mm) | 24.5″ (622 mm) | 5.5″ (140 mm) | 9″ appx. (229 mm) |
| HL-20
|
Extended Shaft Gage / 10-50mm / Vertical Carrier | 0.37″ – 2″ (10 – 50 mm) | 0.18″ – 24″ (4.7 – 610 mm) | 24.5″ (622 mm) | 5.5″ (140 mm) | 9″ appx. (229 mm) |
| HL-40
|
Extended Shaft Gage / 20-105mm / Vertical Carrier | 0.75” to 4” (20mm to 102mm) | 0.18″ – 24″ (4.7 – 610 mm) | 24.5″ (622mm) | 5.5″ (140mm) | 9″ appx. (229 mm) |
JSLP-10
 |
Slim Low Profile | 0.04″ – 1″ (1 – 25mm) | 0.18″ – 4″ (4.7 – 102 mm) | 6″ (152 mm) | 4.5″ (114 mm) | 5.5″ appx. (140 mm) |
JSLP-10C
 |
Slim Low Profile With Built-In Comparator Base | 0.04″ – 1″ (1 – 25mm) | 0.18″ – 4″ (4.7 – 102 mm) | 6″ (152 mm) | 4.5″ (114 mm) | 5.5″ appx. (140 mm) |
| JLP-10
|
Low Profile Comparator Gage / 3-25mm | 0.04″ – 1″ (1 – 25mm) | 0.18″ – 4″ (4.7 – 102 mm) | 6″ (152 mm) | 4.5″ (114 mm) | 5.5″ appx. (140 mm) |
| J-10
|
Surface Plate or Comparator Gage / 3-25mm | 0.04″ – 1″ (1 – 25mm) | 0.18″ – 4″ (4.7 – 102 mm) | 6″ (152 mm) | 4.5″ (114 mm) | 5.5″ appx. (140 mm) |
J-20
 |
Surface Plate or Comparator Gage / 10-50mm | 0.37 – 2″ (10 – 50 mm) | 0.18″ – 6″ (4.7 – 152 mm) | 7″ (178 mm) | 5″ (127 mm) | 5.5″ appx. (140 mm) |
| J-40
|
Surface Plate or Comparator Gage / 20-105mm | 0.75″ – 4″ (20 – 102 mm) | 0.25″ – 8″ (6.3 – 203 mm) | 8.5″ (216 mm) | 6.5″ (165 mm) | 9″ appx. (229 mm) |
K1-10
 |
Dual Indicator Gage / 3-25mm / Standard Carrier / Side Carrier | 0.04″ – 1″ (1 – 25mm) | 0.18″ – 4″ (4.7 – 102 mm) | 10.5″ (267 mm) | 6.5″ (165 mm) | 6″ appx. (152 mm) |
| K1-20
|
Dual Indicator Gage / 10-50mm / Standard Carrier / Side Carrier | 0.37″ – 2″ (10 – 50 mm) | 0.18″ – 6″ (4.7 – 152 mm) | 12.5″ (318 mm) | 6.5″ (165 mm) | 6″ appx. (152 mm) |
| K1-40
|
Dual Indicator Gage / 20-105mm / Standard Carrier / Side Carrier | 0.75″ – 4″ (20 – 102 mm) | 0.25″ – 8″ (6.3 – 203 mm) | 14.5″ (368 mm) | 8″ (203 mm) | 8″ appx. (203 mm) |
K2-10
 |
Dual Indicator Gage / 3-25mm / Standard Carrier / Vertical Carrier | 0.04″ – 1″ (1 – 25mm) | 0.18″ – 4″ (4.7 – 102 mm) | 10.5″ (267 mm) | 6.5″ (165 mm) | 6″ appx. (152 mm) |
| K2-20
|
Dual Indicator Gage / 10-50mm / Standard Carrier / Vertical Carrier | 0.37″ – 2″ (10 – 50 mm) | 0.18″ – 6″ (4.7 – 152 mm) | 12.5″ (318 mm) | 6.5″ (165 mm) | 6″ appx. (152 mm) |
| K2-40
|
Dual Indicator Gage / 20-105mm / Standard Carrier / Vertical Carrier | 0.75″ – 4″ (20 – 102 mm) | 0.25″ – 8″ (6.3 – 203 mm) | 14.5″ (368 mm) | 8″ (203 mm) | 8″ appx. (203 mm) |
KK1-10
 |
Triple Indicator Gage / 3-25mm / Standard Carrier / Two Side Carriers | 0.04″ – 1″ (1 – 25mm) | 0.18″ – 4″ (4.7 – 102 mm) | 10.5″ (267 mm) | 4.5″ (114 mm) | 6″ appx. (152 mm) |
KK1-20
 |
Triple Indicator Gage / 10-50mm / Standard Carrier / Two Side Carriers | 0.37″ – 2″ (10 – 50 mm) | 0.18″ – 6″ (4.7 – 152 mm) | 12.5″ (318 mm) | 6.5″ (165 mm) | 6″ appx. (152 mm) |
| KK1-40
|
Triple Indicator Gage / 20-105mm / Standard Carrier / Two Side Carriers | 0.75″ – 4″ (20 – 102 mm) | 0.25″ – 8″ (6.3 – 203 mm) | 14.5″ (368 mm) | 8″ (203 mm) | 8″ appx. (203 mm) |
KK2-10
 |
Triple Indicator Gage / 3-25mm / Standard Carrier / Side Carrier & Vertical Carrier | 0.04″ – 1″ (1 – 25mm) | 0.18″ – 4″ (4.7 – 102 mm) | 10.5″ (267 mm) | 4.5″ (114 mm) | 6″ appx. (152 mm) |
| KK2-20
|
Triple Indicator Gage / 10-50mm / Standard Carrier / Side Carrier & Vertical Carrier | 0.37″ – 2″ (10 – 50 mm) | 0.18″ – 6″ (4.7 – 152 mm) | 12.5″ (318 mm) | 6.5″ (165 mm) | 6″ appx. (152 mm) |
| KK2-40
|
Triple Indicator Gage / 20-105mm / Standard Carrier / Side Carrier & Vertical Carrier | 0.75″ – 4″ (20 – 102 mm) | 0.25″ – 8″ (6.3 – 203 mm) | 14.5″ (368 mm) | 8″ (203 mm) | 8″ appx. (203 mm) |