Mark-10 Advanced Test Frames (Series F): F105, F305, F505, F505H

Sale!

Note: For full operation out of the box, you will need a Series FS05 Force Sensor, and Grips/Attachments to secure the sample.

Series F Brochure Series F Manual

This family of force testers is designed for tension and compression force testing applications, with force capacities up to 500 lbF (2.2 kN). Select from vertical or horizontal orientations, along with a broad range of force sensor capacities and an expansive array of grips and fixtures.

Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device.

If you would like more information about the various options or need assistance with configuring a setup for your application, please don’t hesitate to reach out to us for advice!

* All test frame models contain a universal power supply (80 – 240V) and power cord with US prong style. Add suffix ‘E’ for European prong, ‘U’ for UK prong, or ‘A’ for Australian prong. Ex: F505-IMTE. Tablets are supplied with a universal power supply, however, are only available with a US prong. A prong adapter is included when one of the above-mentioned suffixes is specified.

Starting at $7,200.00$6,840.00

Clear

Additional Items To Consider

Series F Advanced Test Frame Features

  • Rigid and precise by design
  • Conveniently modular
  • External limit switches
  • Seamless force sensor interface
  • Easy-to-service electronics

IntelliMESUR® Software

IntelliMESUR® software is an integrated solution running on Windows tablets and PCs. Select a pre-loaded 10.1” tablet with mounting bracket or use your own Windows device. With IntelliMESUR®, you can create and run a wide range of basic and multi-step tests, including:

Limit testing to a load, break, or distance

  • Height measurement
  • Load holding
  • Cycle testing
  • Multi-step testing, utilizing any combination of the above functions

Run individual runs or batches, and view data in graphical format or results tables. Save or export data as needed, or generate a report.

Specifications

SpecsF105F305F505F505H
Load capacity*:100 lbF
[0.5 kN]
300 lbF
[1.5 kN]
500 lbF
[2.2 kN]
Maximum travel:18.0 in
[457 mm]
Speed range:0.02 – 45 in/min
[0.5 – 1,100 mm/min]
Load accuracy
(% of full scale)

  • Test frame: ±0.1%
  • Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15%
Load sampling rate:20,000 Hz
Data acquisition rate:1,000 Hz
Speed accuracy:±0.2% of setting, virtually no variation with load
Distance accuracy: ±0.002 in [0.05 mm], factory-compensated at up to full load
Distance resolution:0.0005 in [0.01 mm]
Limit switch repeatability:±0.001 in [0.03 mm]
Power:Universal input 100-240 VAC, 50/60 Hz, 300W
Fuse type:1.2 A, 250V, 3AG, SLO BLO
Weight (test frame only):60 lb
[27 kg]
70 lb
[32 kg]
Shipping weight:75 lb
[34 kg]
85 lb
[39 kg]
Environmental conditions:

  • Indoor use only
  • Up to 6,500 ft [2,000 m] above sea level
  • Temperature range: 40 – 95°F [5 – 35°C]
  • Humidity range: up to 80% relative humidity at 31°C, decreasing
    linearly to 50% relative humidity at 40°C, non-condensing
  • Mains supply voltage fluctuations up to ±10 % of the nominal
    voltage
  • Transient overvoltages up to the levels of Overvoltage Category II
  • Use in environments up to Pollution Degree 2
Conformance:CE
Warranty: 3 years [see individual statement for further details]

* Load capacity is reduced at higher speeds, as follows:
– F305: limited to 200 lbF [1 kN] above 24 in [610 mm]/min
– F505 / F505H: limited to 300 lbF [1.5 kN] above 24 in [610 mm]/min

In The Box

IMT ModelsIM Models
The F105-IMT, F305-IMT, F505-IMT, and F505H-IMT advanced test frames include the following accessories:

(1) Control panel, mounting bracket, and hardware
(1) Mounting bracket, column end (F505H only)
(1) USB cable
(1) #10-32M medium hook
(1) 5/16-18M large hook
(1) #10-32F 2” diameter compression plate
(1) #10-32 M/F 2” extension rod
(1) #10-32 F/F coupler
(1) Adapter, 5/16-18M to #10-32F
(1) Set screw, #10-32 x 3/4”
(2) Hex nut, #10-32
(1) Power cord
(1) Allen wrench set
(1) NIST-traceable certificate of calibration, force

The F105-IM, F305-IM, F505-IM, and F505H-IM advanced test frames include the following accessories:

(1) Mounting bracket, column end (F505H only)
(1) USB flash drive containing software installation files
(1) USB dongle
(1) USB cable
(1) #10-32M medium hook
(1) 5/16-18M large hook
(1) #10-32F 2” diameter compression plate
(1) #10-32 M/F 2” extension rod
(1) #10-32 F/F coupler
(1) Adapter, 5/16-18M to #10-32F
(1) Set screw, #10-32 x 3/4”
(2) Hex nut, #10-32
(1) Power cord
(1) Allen wrench set
(1) NIST-traceable certificate of calibration, force

Optional Equipment

Series FS05 force sensors

Measure tension and compression forces. Mount directly to the test frame’s crosshead without any cables. Capacities from 0.12 to 500 lbF [0.5 to 2,500 N].

Safety shield (AC1086)

Provides pinch and sample debris protection for the operator. Includes an electrical interlock, preventing operation while the door is open.

Single column extensions (AC1094-1 / -2 / -3)

Increase the vertical clearance for tall samples. Multiple extensions may be stacked for very long samples.

Three lengths are available – 6, 12 and 24 in [150, 300, and 600 mm].

Not compatible with the AC1086 safety shield.

Double column extensions (AC1095-1 / -2 / -3)

Accommodate up to a 20 in. [508 mm] wide sample, or ø21.5 in [ø546 mm] round sample.

Three heights are available – 6, 12 and 24 in [150, 300, and 600 mm]. Base contains rows of T-slots for fixture mounting.

Not compatible with the AC1086 safety shield.

USB hub (AC1093)

Test frame-mounted 4-port USB hub improves cable management and conveniently accommodates peripherals, such as a flash drive, barcode scanner, etc. Compatible with all Series F test frames.

Eye end adapters

Allow for quick grip installation and removal, and prevent grip rotation.
Mount to common test frames, load cells, and force gauges.

Adapter, FS05 to Plug & Test® connector

Adapts a Series FS05 force sensor or PTAF sensor adapter to Plug & Test® type interface, for ease of external calibration via a Mark-10 indicator. Also permits mounting of a Series FS05 sensor to Models F755, F755S, F1505, and F1505S test frames.

Third-party sensor adapter (PTAF)

Adapt a third-party party force sensor to Series F frames and Models M5I and M7I indicators.

Dimensions

F105 / F305 / F505
IN[MM]

Weight75 lbs
Dimensions15 × 10 × 33 in
Model

F105-IMT, F305-IMT, F505-IMT, F505H-IMT, F105-IM, F305-IM, F505-IM, F505H-IM

Scroll to Top
Scroll to Top