Mark-10 ES10 – ES20 Manual Test Stands

The Mark-10 compact and economical test stands are ideal for low force applications with relatively small sample sizes. The ES10 and ES20 produce both tensile and compressive force up to 100 lbF (500 N). Choose between lever operation for quick test or hand wheel operation for better control of motion. Combine these test stands with Mark-10 digital force gauges and gripping fixtures to create complete testing solutions.

Mark-10 ES10 – ES20 Manual Test Stand Features

• Small size
• Compatible with all Mark-10 force gauges, grips
• Mounting holes for bench mounting
• Large base plate with 5 #10-32 UNF holes for fixture mounting
• Competitor force gauge mounting kits available

Optional Equipment

• A wide range of force gauges and gripping fixtures

• Base Plate
  Contains 25 #10-32 thread holes for fixture mounting

• Dial indicator kit “Top”
  Displays up to 1″ of displacement with resolution of 0.001″

• Digital indicator kit “Bottom”
  Displays up to 1″ / 25 mm of displacement with resolution of 0.0005″ / 0.01 mm. Includes zero button and in/mm selector button.

• Brackets for indicator
  Brackets are provided only, without indicator, for cases where a customer-supplied indicator is preferred.

• Competitor force gauge mounting kits available

• Eye End Adapters
  Allow for quick grip installation and removal, and prevent grip rotation. Mount to common test frames, load cells, and force gauges.

When ordering an ES10 or ES20 test stand with a Series MG force gauge with 20 lbF (100 N) or lower capacity force gauge and most Mark-10 grips, the G1039 coupler or any length extension rod is required in order to provide adequate clearance between the load cell shaft and the grip. MG50 and higher capacity force gauges include a G1039 coupler.

Dimensions

ES10

ES20